JVC SR-VS20U - Manual (Page 22)

22
EN
1 2 3
4 5 6
7 8 9
0
2
4
1
3
T W
DV S-VHS
Simple
Recording
LOAD A CASSETTE
1
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
.
SELECT VHS DECK
2
Press S-VHS .
SELECT RECORDING
CHANNEL
3
Press CH +/–. Or press the appropriate NUMBER keys,
then press ENTER. (The channel changes after a few
seconds whether you press ENTER or not.)
SET TAPE SPEED
4
Press SP/EP to set the recording speed.
START RECORDING
5
Press and hold REC and press PLAY on the remote
control, or press REC on the VCR's front panel. The
VHS record indicator ( ) lights.
Video Calibration takes place at the beginning of
both the first SP and the first EP recording after
inserting the cassette (when Video Calibration is set
to "ON"
੬
pg. 34).
PAUSE/RESUME
RECORDING
6
Press PAUSE. Press PLAY to resume recording.
● During record pause, you can change the recording
channel by using the CH +/– buttons or NUMBER keys.
Video Calibration will not take place if the tape
speed is changed while in record pause mode.
STOP RECORDING
7
Press STOP. The VHS record indicator ( ) goes off.
Then press EJECT on the VHS deck to remove the
cassette.
PAUSE
STOP
REC
PLAY
CH
ENTER
NUMBER
SIMPLE PLAYBACK AND RECORDING (cont.)
Turn on the TV and select the AV mode.
EJECT
PLAY
STOP
S-VHS
PAUSE
SP/EP
NOTE:
It is not possible to record a TV program on both the VHS deck
and the DV deck simultaneously.
In addition, it is not possible to record simultaneously from the
same external input.
CH
REC
S-VHS
VHS record indicator
VHS Deck