JVC SR-VS20U - Manual (Page 33)

EN
33
12BIT MODE SOUND YOU HEAR
SOUND1 Original recorded sound
SOUND2 Audio-dubbed sound
FULL SOUND
Original recorded sound and Audio-
dubbed sound
NOTE:
Set "SOUND MODE" to "12BIT" at the original recording on a
Mini DV tape, if you wish to perform Audio Dubbing later.
You can select the soundtrack by simply pressing the
remote control's A. MONITOR button as follows:
L+R
→
L
→
R
→
L+R
Select The Soundtrack
(DV deck)
The DV deck can record two soundtracks simultaneously (L and R)
and play back the selected one, or both together. Or, when
viewing a pre-recorded tape that contains two separate audio
programs, you can choose to listen to either one by selecting
either "L" or "R".
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS DV MODE SET
SCREEN
2
Move the highlight bar
(arrow) to "DV MODE SET"
by pressing
%fi, then press
OK or
#
.
SELECT SOUND MODE
3
Move the highlight bar
(arrow) to "SOUND
MODE" by pressing
%fi,
then press OK or
#
to
select "12BIT" or "16BIT".
RETURN TO NORMAL
SCREEN
4
Press MENU.
Sound Mode Selection
(DV deck only)
12BIT Mode Setting
(Audio-dubbed Mini DV Tape)
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS DV MODE SET
SCREEN
2
Move the highlight bar
(arrow) to "DV MODE SET"
by pressing
%fi, then press
OK or
#
.
SELECT 12BIT MODE
3
Move the highlight bar
(arrow) to "12BIT MODE"
by pressing
%fi, then press
OK or
#
to select
"SOUND1", "SOUND2" or
"FULL SOUND".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
When "12BIT MODE" is set to "FULL SOUND":
● For bilingual tapes, both the main and sub audio will be
audible.
● To select just the main audio or just the sub audio of Bilingual
tapes, set "12BIT MODE" to "SOUND1".
MAIN MENU
MODE SET
VHS MODE SET
=DV MODE SET
TUNER SET
INITIAL SET
PRESS ( 5,∞), THEN (OK)
PRESS (MENU) TO END
DV MODE SET
=SOUND MODE 12BIT
12BIT MODE SOUND1
=
SELECT WITH ( 5,∞) AND (OK)
PRESS (MENU) TO END
MAIN MENU
MODE SET
VHS MODE SET
=DV MODE SET
TUNER SET
INITIAL SET
PRESS ( 5,∞), THEN (OK)
PRESS (MENU) TO END
DV MODE SET
SOUND MODE 12BIT
=12BIT MODE SOUND1
=
SELECT WITH ( 5,∞) AND (OK)
PRESS (MENU) TO END