Vm8012, Disc/mp3/wma playback – Jensen VM8012 User Manual

Page 13

VM8012

DISC/MP3/WMA PLAYBACK

Insert and Eject Disc
Press the button (4) to flip the front panel down. Insert a disc, label side

up, into the disc slot (18).

To stop disc play and eject the disc, press the button to flip the front

panel down and then press the eject button (1).

NOTE: The unit is designed for play of standard 5” (12 cm.) discs only.
Do not attempt to use 3” (8 cm.) CD singles in this unit, either with or
without an adaptor, as damage to the player and/or the disc may
occur. Such damage will not be covered by the warranty on this
product.

Controlling Disc or File Playback
Pause
Press the pause >/|| button (8) to suspend playback. Press the pause >/||

button again to resume playback.
Track Select
Press the TUNE/TRACK >>| or |<< buttons (17) for less than one second to

advance to the next track/file. The selected track number will appear on the

display.
Fast Forward/Reverse

Press and hold

the TUNE/TRACK >>| or |<< buttons (17) to fast forward or

fast reverse. Press and hold once for 2X. Press and hold additional times

for 4X, 8X, 20X or PLAY. Press the play/pause >/|| button (8) to end fast

forward or reverse and resume normal playback.
Intro Scan (INT)
During disc play, press the INT button (9) to select “INTRO” and play the

first 15 seconds of each track/file. When the desired track is reached, press
INT

again to end the scan and play the selected track.

Repeat (RPT)
Press the RPT button (10) multiple times during playback to select from the

following repeat play options:
•

VCD/CD: RPT ONE (track), RPT ALL (disc), RPT OFF

•

DVD: RPT CHAPTER, RPT TITLE, RPT OFF

•

MP3/WMA: RPT ONE (file), RPT DIR (directory/folder), RPT ALL (disc),

RPT OFF

Random (RDM)
Press the RDM button (11) during playback to select “RANDOM” and play

all tracks/files in random, shuffled order. Press RDM again to stop random

play.
Section Repeat (A-B)
To repeat a specified section of a track, perform the following steps:
1. Press the A->B button on the remote control to select the starting point.

The display will show “REPEAT A-”.

2. Press A->B when you reach the desired ending point. The display

shows “REPEAT A-B” and the selected section will play repeatedly.

To cancel section repeat, press the A->B button again. “A-B CANCEL”

appears on the display.

INT

RPT

RDM

LOUD

ST/MO

LOC

MUTE

BAND

DISP

SRC