Jensen VM8023HD - Manual

Need help?
For technical assistance,
call the Jensen customer
support line at
1-800-323-4815.
Jensen VM8023HD Receiver Quick Start Guide
IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring
instructions carefully, or have the installation handled by an experienced technician.
Purple Purple/Black
Stripe
Gray/Black
Stripe
White/Black
Stripe
White Green/Black Green
Left Speaker
(Front)
Right Speaker
(Front)
Left Speaker
(Rear)
Right Speaker
(Rear)
Blue
Red
R (Red)
L (White)
Power Antenna
Connect to power antenna or amplifier.
If not used, tape bare end of wire.
Accessory/Ignition
Connect to existing radio wire
or radio fuse.
R (Red)
L (White)
Yellow
Black
Chassis Ground
Battery
)
-
(
)
(+
Connect the black wire to the factory ground wire. If a
factory ground wire is not provided, locate a clean,
unpainted metal part of the dash and secure the ground
wire with a "ring" terminal and a sheet metal screw.
Connect the yellow wire to the battery
or 12 volt power source that is always
live. This wire MUST be connected
for the radio to work.
FILTER
BOX
Gray
Stripe
FRONT REAR
External
Power
Amplifier
IMPORTANT!
The pink parking
wire MUST be
connected to the
switched side of
the parking break
circuit (the part that
becomes grounded
when the brake is
applied).
Fuse (15A)
(Blue)
(Yellow)
PARKING
(Yellow)
(Yellow)
VIDEO OUT 1
VIDEO OUT 2
SUB (Subwoofer) OUT
Pink
REAR Line Out
FRONT Line Out
CAMERA IN
SWC (Steering Wheel Control)
iPod
(Sold Separately)
(Requires PAC SWI-PS Interface Adapter)
CAMERA (Active High Level Input)
+ (Green/
White)
SAT BUS
IP
O
D
B
U
S
Satellite Radio Tuner
(sold separately)
JXMC or XMDJEN100 Cables
(sold separately)
jL
in
k
/j
L
in
k
iP
o
d
C
a
b
le
(I
n
c
lu
d
e
d
)
SAT R (Red)
SAT L (White)
2
Printed in China