Jensen VM9224BT - Manual

1
VM9224BT
VM9224BT Head Unit
Left and Right Double DIN
Mounting Brackets
Double DIN Half Sleeve Install Bracket
External Microphone
Two Custom Cosmetic Trim Rings
Parking Brake Wire
Hardware Bag
Speaker Output Harness
Power Input Harness
2 x Accessory Harness
Installation Guide
What’s in the Box
You will need these tools and supplies to
install your VM9224BT:
• Torx
type, fl at-head and Philips
screwdrivers
•
Wire cutters and strippers
• Tools to remove existing radio (screw
driver, socket wrench set or other tools)
• Electrical tape
• Crimping tool
• Volt meter/test light
• Crimp connections
• 18 gauge wire for power connections
• 16 – 18 gauge speaker wire
Tools and Supplies
Installation Guide
WARNING! Never install this unit where operation and viewing could interfere with
safe driving conditions.
EJECT
MUTE
VM9224BT
A/V INPUT