Jensen UV8035 User Manual
Jensen Car Video
UV8035
Quick Start Guide
Mobile Multimedia AM/FM/DVD Receiver
CHASSIS GROUND
Connect the red wire to the factory
Accessory or Ignition wire, which
receives power when the key is
turned on.
ACCESSORY
POWER ANTENNA/
REMOTE AMP TURN ON LEAD
Positive (+) 12VDC output when the head
unit is turned on. Connect the blue wire to
a motorized antenna or to an amplifier.
REMOTE AMPLIFIER TURN ON LEAD
Positive (+) 12VDC output when the head
unit is turned on. Connect the blue wire to
a power amplifier.
BATTERY
RCA OUTPUT
Connect to an
optional amplifier.
AMP
FILTER &
FUSE BOX
)
-
()
(+
Connect the black wire to the factory ground wire. If a
factory ground wire is not provided, locate a clean,
unpainted metal part of the dash and secure the ground
wire with a "ring" terminal and a sheet metal screw.
Connect the yellow wire to the battery
or 12 volt power source that is always
live. This wire MUST be connected
for the radio to work.
AMP
Need help?
For technical assistance,
call the Audiovox
customer
support line at
.
1-800-323-4815
SPEAKERS
PARKING
Connect the pink wire to the negative
parking brake wire. This MUST be
connected in accordance with
federal, state, and local laws.
IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring
instructions carefully, or have the installation handled by an experienced technician.
Printed in China
ANTENNA CONNECTOR
Connect to the factory or aftermarket
antenna lead. (Optional extensions or
adapters may be necessary depending
on the type of vehicle you have)
Left Front
Right Front
Left Rear
Right Rear
+
green
-
green/black
+
purple
-
purple/black
+
white
-
white/black
+
gray
-
gray/black
Printed in China
R
L
Aux-In
Video In
Video Out 1
Video Out 2
Subwoofer Out
Fuse (15A)
IMPORTANT!
The pink parking wire MUST
be connected to the switched
side of the parking break
circuit (the part that becomes
grounded when the brake is
applied).