Jensen VM8113 - Manual

1
VM8113
VM8113 Head Unit
Mounting Sleeve
Wiring Harness
Installation Hardware (rubber cushion,
mounting bolt, screws)
Removal Keys
Face Plate and Storage Case
Parking Brake Extension Wire
3.5mm to 3.5mm A/V Adapter Cable
Remote Control with Battery
Installation Guide
What’s in the Box
You will need these tools and supplies to install your VM8113:
• Torx
type, fl at-head and Philips screwdrivers
• Wire cutters and strippers
• Tools to remove existing radio (screwdriver, socket wrench set or other tools)
• Electrical tape
• Crimping tool
• Volt meter/test light
• Crimp connections
• 18 gauge wire for power connections
• 16 – 18 gauge speaker wire
Tools and Supplies
Installation Guide
Instruccionnes de Instalación
Instructions d’installation
WARNING! Never install this unit where operation and viewing could interfere with
safe driving conditions.
Para obtener instrucciones en Español, diríjase a la página 5. Pour des instructions en Francais, référez-vous à la page 9.
iPod Menu