Jensen VM8012 - Manual (Page 12)

VM8012
8
TUNER OPERATION
Select a Band
Press the BAND button (3) to change between three FM and two AM
bands. Each band stores up to six preset stations.
Tuning
Manual Tuning
Press the TUNE/TRACK >>| or |<< buttons (17) to move the radio
frequency number up or down one step.
Seek Tuning
Press and hold
the TUNE/TRACK >>| or |<< buttons (17) for more than
three seconds to seek the next/previous station automatically.
Preset Stations
Up to six stations on each band can be stored as presets, which can then
be instantly recalled by pressing the associated preset button (12). To store
a station, turn the radio on and select the desired band and station. Press
and hold
the desired preset button (numbered one through six on the face
of the radio) for more than two seconds. When stored, the preset number
will appear in the display. The station is now stored and can be recalled by
pressing the corresponding preset button. Repeat for the remaining five
presets on the current band and for presets on the other four bands.
Preset Scan
Press the AS button (14) to scan and play each preset station for 5 seconds
each. Press AS again to stop preset scan.
Automatic Preset Store
Press and hold
the AS button (14) to select six strong stations and store
them in the current band using the AUTO PRESET feature. The radio will
automatically scan all bands and enter strong stations into the preset
memory positions. After entering the stations into memory, the unit will
automatically stop at each station for five seconds, allowing you to preview
each selection. When using the AUTO PRESET feature, the new stations
replace any stations already stored in preset memory.
NOTE: You can stop the AUTO PRESET function at any time by
pressing the AS button again.
20 21
INT
RPT RPT
RDM
LOUD
ST/MO
LOC MUTE
AS BAND DISP SRC
1
2
3 6
5
4
/
STEREO
FM1: 98.10 MHZ 3
INDICATOR
EQUALIZER
INDICATOR
LOUD SETTING INDICATOR
PRESET NUMBER