JVC GD-V4211PCE - Manual (Page 34)

34
Menu Classifications
(Continued)
PICTURE ADJ. (Picture adjustment): See page 16.
CONTRAST Adjusts the contrast of the picture.
BRIGHT Adjusts the brightness of the picture.
CHROMA*** Adjusts the color density of the picture.
PHASE* Adjusts the color phase.
SHARPNESS Adjusts the outlines of the picture.
sub menu Displays the fine adjustment bar.
reset Resets the Picture Adjustment Menu settings to defaults.
SIZE/POSITION ADJ. : See page 17.
H.SIZE Adjusts the horizontal screen size.
H. POSITION Adjusts the horizontal screen position.
V. SIZE Adjusts the vertical screen size.
V.POSITION Adjusts the vertical screen position.
CLOCK PHASE** Adjusts to eliminate stripes or flickering.
Normally, no adjustment is needed.
sub menu Displays the fine adjustment bar.
reset Resets Size/position Adjustment Menu settings to defaults.
FUNCTION SELECT: See pages 19 to 23.
COLOR TEMP. Adjusts the color temperature.
Use when the picture is reddish or bluish.
PICTURE MODE**** Selects the picture quality suited to either the still picture or the moving picture.
ASPECT
Selects the horizontal to vertical ratio of the screen.
SIGNAL MODE*** • Selects a color system (NTSC, NTSC 4.43, PAL, SECAM) when VIDEO A or VIDEO B input is
selected.
• Selects a scan system — 480i, 576i, 480p, 720p, 1080i (1035i) — when COMPONENT input is
selected. Normally, set to “AUTO.”
RGB INPUT Sets the correct RGB terminal you use.
reset Resets the Function Selection Menu settings to defaults.
* Adjustment is not possible when RGB input is selected.
** Adjustment is only possible when viewing NTSC signal through the VIDEO A or B terminal.
*** Adjustment is only possible when RGB input is selected.
****Adjustment is only possible when the RGB15K-50, RGB15K-60, PC98, VGA480-60, SVGA-56, SVGA-60, or XGA-60 signals
come in.
31-40.GD-V4210PZW[EN]/f 00.9.29, 5:56 PM 34