Installation, Precautions, Menu input power – JVC GD-V4211PCE User Manual
Page 10: When hanging the monitor from the ceiling
10
Installation
Precautions
• When mounting the Monitor vertically, it is necessary to adjust the cooling fan speed to provide better heat
dissipation. Do not forget to perform this adjustment. (See page 27.)
• When installing the Monitor, be sure to use a dedicated Stand Unit, Wall Mounting Unit, or Monitor Hanger Unit, depending
on a particular case. Ask your dealer for installation.
• When installing the Monitor, refer also to the user manual for each option to use. Do not tilt the Monitor rightward, leftward,
or backward.
• Route the power cord and connection cables along wall or floor corners to avoid walking on them.
• For good heat dissipation, try to leave the following distances of space (minimum) around the Monitor.
• The ambient temperature of the installation place should be within the range of 0˚C to 40˚C.
• When installing the Monitor in a place, such as near the ceiling, the remote control may not work correctly because of possible
effects from the surroundings. If this happens, use the remote control as a wired remote control or move the Monitor where it
is free from these effects.
When installing the Monitor on a stand
When mounting the Monitor on the wall
Notes:
• Do not allow the same image (pattern) to be continuously displayed on the screen for a long time; otherwise, the area on the
screen corresponding to the image may vary in brightness, leaving an afterimage on the screen. To reduce the afterimage, you
can use the Refresh function (see page 29).
• The Monitor is manufactured using very high-precision technology, allowing for more than 99.99% active pixels, however, be
aware that only a slight number of pixels may be deficient or lit at all times.
• Do not install the Monitor in such a way that the Monitor and other AV equipment affect each other adversely. (For example,
if a disturbed image or noise due to electromagnetic interference occurs, or if the infrared remote control malfunctions, change
the installation place.)
Front View
200 (7 )
/
8
7
150
(4 )
/
16
15
50
(2)
50
(2)
MENU INPUT
POWER
150
(4 )
/
16
15
Wall
Side View
Unit: mm (inch)
Take measures against the Monitor from overturning:
To protect against abnormal events such as earthquakes and to prevent unexpected accidents, take appropriate measures
for preventing the Monitor from overturning; should it overturn, this could lead to personal injury.
For detailed information, refer to the manual supplied for the stand.
Front View
50
(2)
200 (7 )
/
8
7
MENU INPUT
POWER
100 (3 )
100
(3 )
/
16
15
100
(3 )
/
16
15
/
16
15
Side View
Unit: mm (inch)
50
(2)
200
(7 )
/
8
7
Unit: mm (inch)
When hanging the Monitor from the ceiling
Side View
04-13.GD-V4210PZW[EN]/f
00.9.29, 5:54 PM
10