JVC GD-42X1E - Manual (Page 30)

Set up the monitor for your
PC
Selecting the input signal
When you connect a PC to the INPUT-4 terminal, set the type of the input
signal accordingly.
● For signals in VGA60 and XGA60
Set “Sampling Mode” to “Std”. (➔ page 34)
● For signals in WVGA60
Set “Sampling Mode” to “Wide”. (➔ page 34)
● For signals in WXGA (1280), WXGA (1360) and WXGA60
1 Set “Sampling Mode” to “Wide”. (➔ page 34)
2 Set “WXGA Select” as follows. (➔ page 34)
● For signals in WXGA (1280): “1280*768”
● For signals in WXGA (1360): “1360*768”
● For signals in WXGA60: “1366*768”
● For signals in SXGA60
Set “SXGA / SXGA+” to “SXGA”. (➔ page 34)
● For signals in SXGA+60
Set “SXGA / SXGA+” to “SXGA+”. (➔ page 34)
A-10