IBM 8260 - Manual (Page 24)

--- REACHABLE ADDRESS SETTING : -------------------------------------------
--- NOW TRY TO PING.. ----------------------------------------------------
To be sure you have successfuly completed PNNI installation, in the case
you have set TCP/IP parameters in a classical IP or LAN Emulation
network, enter from HUB b, PING x.y.z.w where x.y.z.w is the HUB c ip
address then enter from HUB b, PING a.b.c.d where a.b.c.d is the HUB d ip
address
--- MIGRATION COMPLETE ----------------------------------------------------
You have successfully completed the MES 5511 upgrade.
Installation Instructions
Copyright IBM Corp. 1998
Page 24 June 17 1998 EC : F34705 PN : 26L0227
After having completed the swap, you lose your STATIC ROUTES and LOGICAL
LINKS
o Define the reachable address over the IISP link with your old static
route and your old VPI.
example to set up reachability to PEER GROUP 1 HUBa and b (figure3):
HUBd>SET REACHABLE_ADDRESS
6.1 96 39.99.99.99.99.99.99.00.00.77.77.01
example to set up reachability to PEER GROUP 2 HUBc (figure3):
HUBd>SET REACHABLE_ADDRESS
6.1 96 39.99.99.99.99.99.99.00.00.77.77.02
o Check that your reachable address is active (Y) with the command:
HUBd>SHOW REACHABLE_ADDRESS 6.1