Diagram 6 – Impex PHE 2000 User Manual

Page 13

STEP 6 (See Diagram 6)

A.) Attach the Butterfly Base (#14) to the Vertical Frame (#5). Secure it with one 4 ¾” x 2”

Bracket (#26), two M10 x 3 ½” Carriage Bolts (#71), two

∅

¾” Washers (#87), and two

M10 Aircraft Nuts (#89).

B.) Insert the Right Butterfly (#20) into the right pivot on Butterfly Base. Secure it with one M10

x ¾” Allen Bolt (#76) and

∅

1 3/8” Washer (#66) from the bottom.

C.) Insert the Butterfly Handle (#13) into the pivot on the Right Butterfly. Secure it with one

M10 x ¾” Allen Bolt (#76) and

∅

1 3/8” Washer (#66).

D.) Repeat Procedures B and C above to install the other side.

DIAGRAM 6