Integra DTR-8.3 - Manual (Page 46)

46
1. Speaker Setup Menu
After you have installed the DTR-8.3, connected all the components,
and determined the speaker layout, it is now time to perform the
settings in the Speaker Setup Menu for the optimum sound acoustics
for your environment and speaker layout.
Before you perform the following settings, it is important that you
first determine the following items:
• The types and sizes of the speakers that are connected.
• The distance from each speaker to the normal listening position.
Memo:
1-1. Speaker Config Sub-menu
Use this sub-menu to enter which speakers are connected and the
size of each speaker.
a. Subwoofer
Yes: Select when a subwoofer is connected.
No: Select when a subwoofer is not connected.
b. Front L/R
Large: Select if the front speakers are large sized.
Small: Select if the front speakers are small sized.
• If “No” is selected for the Subwoofer setting, this setting is
fixed to “Large.”
c. Center
None: Select if no center speaker is connected.
Large: Select if the center speaker is large sized.
Small: Select if the center speaker is small sized.
• If “Small” is selected for the Front setting, “Large” cannot be
selected for this setting.
d. Surr L/R
None: Select if no surround left and right speakers are
connected.
Large: Select if the surround left and right speakers are large sized.
Small: Select if the surround left and right speakers are small sized.
• If “Small” is selected for the Front setting, “Large” cannot be
selected for this setting.
e. Surr Back
None: Select if no surround back left and right speakers are connected.
Large: Select if the surround back left and right speakers are large sized.
Small: Select if the surround back left and right speakers are
small sized.
• If “None” is selected for the Surround L/R setting, this setting
will not appear.
• If “Small” is selected for the Surround L/R setting, “Large”
cannot be selected for this setting.
• If the Surr Back/Zone 2 setting in the Surr Back/Zone 2 Sub-
menu of the Hardware Setup Menu is set to “Zone 2,” this
setting will not appear.
Speaker Setup
Advanced Menu
1.Speaker Setup
1.Speaker Config
2.Speaker Distance
3.Level Calibration
|ENTER|Quit:|SETUP|
Advanced Menu
1.Speaker Setup
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Bass Peak Level
|ENTER| Quit:|OSD|
1-1.Speaker Config
a.Subwoofer :Yes
b.Front L/R :Small
c.Center :Small
d.Surr L/R :Small
e.Surr Back :Small
f.Crossover:80Hz(THX)
Quit:|SETUP|
SL SR
SBL SBR
Front
[ ]m/ft
[ ]m/ft
[ ]
m/ft
[ ]m/ft
[ ]m/ft
[ ]m/ft [ ]m/ft
[ ]m/ft
Front SW Center
Monitor