Intel SGI Altix 450 - Manual (Page 27)

Safety Precautions
007-4857-002 5
Safety Measures
Observe the following safety measures when you install the system:
• Use caution when you remove the system from the shipping crate. Failure to handle the
system carefully can result in personal injury or property damage.
Caution: Ensure that the shipping crate is positioned close to its destination before you
unpack the crate.
Warning: Employ a minimum of two people to lift an IRU, to move the IRU(s) from
one location to another, and to install the IRU(s) in a rack. Otherwise, someone could be
seriously injured. Note that IRUs should have blades and power supplies removed to
make the unit easier to lift and position.
• Do not move the system while it is connected to power.
Warning: Keep fingers and conductive tools away from high-voltage areas. Failure
to follow these precautions will result in serious injury or death. The high-voltage areas
of the system are indicated with high-voltage warning labels.
• Ensure that a qualified electrician has properly installed the power receptacles.
• Set all PDU circuit breakers to the OFF ( O ) position before you plug in the system power
cord.
Warning: Use the following guidelines to prevent the rack from toppling over.
Otherwise, people could be seriously injured and/or equipment could be damaged.
• Follow these guidelines to prevent a rack from toppling over:
– Install all equipment in the lowest available position in the rack.
– Use optional seismic tiedowns where appropriate.
– Always site the unit on a level surface.
!