Invacare Deluxe Three-Position IH6065 series - Manual (Page 26)

SECTION 5—MAINTENANCE
Invacare Mobile Recliners 26 Part No. 1141494
6. Insert new cable assembly into ʺVʺ notch of the mounting bracket (Detail ʺBʺ).
7. Squeeze release lever up toward the mounting bracket and insert anchor end of new
cable assembly into slot of release lever (Detail ʺBʺ).
8. Secure the cable assembly to the back frame with mounting screw. Securely tighten.
FIGURE 5.7 Replacing the Release Handle and Cable Assembly - Model IH6077A Only
Replacing Position Lock Lever - Models H6074A and
IH6065 Series Only
NOTE: For this procedure, refer to
FIGURE 5.8.
Removing Position Lock Lever
1. Remove two screws, nylon washers
and locknuts securing the position lock
lever to the seat frame.
Installing Position Lock Lever
1. Secure the position lock lever to the seat
frame with the two screws, nylon
washers and locknuts.
FIGURE 5.8 Replacing Position Lock Lever
- Models H6074A and IH6065 Series Only
DETAIL “A” - HANDLE DETAIL “B” - CABLE ASSEMBLY
Mounting Screw
Push Handle
Release Handle
Cable
Actuator
Mounting
Bracket
“V” Notch
Slot
Anchor End of
Cable Assembly Release Lever
Screw
Seat Frame
Locknut
Nylon
Washer
Position Lock
Lever