Section 5— maintenance, Replacing the back cushion, Model ih6074a and ih6065 series – Invacare Deluxe Three-Position IH6065 series User Manual

Page 21

SECTION 5—MAINTENANCE

SECTION 5— MAINTENANCE

ƽ WARNING

After ANY adjustments, repair or service and BEFORE use, make sure that all

attaching hardware is tightened securely - otherwise injury or damage may result.

Replacing the Back Cushion

Model IH6074A and IH6065 series

NOTE: For this procedure, refer to FIGURE 5.1.

Removing

1. Remove the four long hex screws that secure the back cushion to the back frame.

2. Remove the four short hex screws that secure headrest bracket to the back cushion.

Repeat for remaining headrest bracket.

Installing

1. Align back cushion with the back frame.

2. Install four long hex screws to secure the back cushion to the back frame. Securely

tighten.

3. Secure the headrest bracket to the back cushion with four short hex screws.

4. Securely tighten. Repeat for remaining headrest bracket.

FIGURE 5.1 Replacing the Back Cushion - Model IH6074A and IH6065 series

Back Cushion

Headrest Bracket

Short Hex Screws

Long Hex

Screws

Back Frame