Positioning the articulating headrest – Invacare Deluxe Three-Position IH6065 series User Manual
Page 17
SECTION 4—OPERATION
17
Assisted Recline
NOTE: For this procedure, refer to FIGURE 4.4.
1. Grasp the armrest with one hand and the push bar with the other hand.
2. Push the back of the chair dowen slowly until a desired position is reached.
Assisted Recline (to Trendelenburg/Shock position)
NOTE: For this procedure, refer to FIGURE 4.4.
1. Lock the rear casters with lock extended toward rear of the chair.
2. Grasp the push bar with one hand.
3. Squeeze on the gas spring release handle with the other hand (Detail “A”).
4. Lower the chair back slowly down into (Shock) position (Detail “B”).
5. Release the gas spring handle.
NOTE: If the cylinder does not unlock when the lever is actuated, or remains permanently
unlocked when the lever is not actuated, cable tension must be adjusted. Refer to Adjusting Gas
Spring Recline Cylinder Assembly ‐ Model IH6077A Only on page 24.
FIGURE 4.4 Reclining the Chair - Model IH6077A - Assisted Recline
Positioning the
Articulating Headrest
NOTE: For this procedure, refer to FIGURE 4.5.
1. Grasp the headrest and push or pull it
into the desired position.
FIGURE 4.5 Positioning the Articulating
DETAIL “B” - RECLINE
POSITION 2 (SHOCK)
Gas Spring
Release Handle
Push Bar
Chair
Back
Chair
Back
DETAIL “A” - RECLINER
Headrest