Intel GA-N680SLI-DQ6 - Manual (Page 44)

GA-N680SLI-DQ6 Motherboard - 44 -
English
Serial-ATA RAID Config
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Serial-ATA RAID Config
Item Help
Menu Level NV SATA RAID function [Disabled]
x NV SATA 1 Primary RAID Enabled
x NV SATA 1 Secondary RAID Enabled
x NV SATA 2 Primary RAID Enabled
x NV SATA 2 Secondary RAID Enabled
x NV SATA 3 Primary RAID Enabled
x NV SATA 3 Secondary RAID Enabled
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
NV SATA RAID function
Enabled Enable NV SATA RAID function.
Disabled Disable NV SATA RAID function. (Default value)
NV SATA 1 Primary RAID
Enabled Enable NV SATA 1 primary RAID function.
Disabled Disable this function. (Default value)
NV SATA 1 Secondary RAID
Enabled Enable NV SATA 1 secondary RAID function.
Disabled Disable this function. (Default value)
NV SATA 2 Primary RAID
Enabled Enable NV SATA 2 primary RAID function.
Disabled Disable this function. (Default value)
NV SATA 2 Secondary RAID
Enabled Enable NV SATA 2 secondary RAID function.
Disabled Disable this function. (Default value)
On-Chip IDE Channel0
Enabled Enable onboard 1st channel IDE port. (Default value)
Disabled Disable onboard 1st channel IDE port.
IDE Prefetch Mode
Enabled Enable IDE data buffer to enhance HDD transfer speed. (Default value)
Disabled Disable IDE data buffer for the system stability.
NV Serial-ATA Controller
All Enabled Enable NV Serial-ATA Controller function. (Default value)
SATA-1 Enable NV SATA-1 function.
SATA-1+2 Enable NV SATA-1+2 function
Disabled Disable this function.