Intel GA-N680SLI-DQ6 - Manual (Page 12)

GA-N680SLI-DQ6 Motherboard - 12 -
English
(Note 1) To use a DDR II 800/667 memory module on the motherboard, you must install a 1333/1066/
800 MHz FSB processor.
(Note 2) EasyTune functions may vary depending on different motherboards.
(Note 3) The adjustable range is dependent on CPUs.
Additional Features Š Supports @BIOS
Š Supports Download Center
Š Supports Q-Flash
Š Supports EasyTune (Note 2)
Š Supports Xpress Install
Š Supports Xpress Recovery2
Š Supports Xpress BIOS Rescue
Bundle Software Š Norton Internet Security (OEM revision)
Overclocking Š Over Voltage via BIOS (CPU, DDRII, NB/PCIE, SB/PCIE, FSB,
HT-Link, SB Standby)
-
CPU Voltage :
Adjustable CPU voltage at 0.025V
(Note 3)
- DDRII Voltage :
Adjustable DDRII voltage at 0.025V
(Adjustable range from 0.025V to 0.775V)
- NB/PCIE Voltage :
Adjustable PCIe voltage at 0.05V
(Adjustable range from 0.05V to 0.20V)
- SB/PCIE Voltage :
Adjustable PCIe voltage at 0.05V
(Adjustable range from 0.05V to 0.55V)
- FSB Voltage :
Adjustable FSB voltage at 0.05V
(Adjustable range from 0.05V to 0.35V)
- HT-Link Voltage :
Adjustable HT-Link voltage at 0.05V
(Adjustable range from 0.05V to 0.35V)
- SB Standby Voltage :
Adjustable SB Standby voltage at 0.10V
(Adjustable range from 0.10V to 0.20V)
Š Over Clock via BIOS (CPU, DDRII, PCIE)
-
PCI Express x16 Clock:
Allows 1 MHz increment from 100 MHz to 150 MHz
- PCI Express x8 Clock:
Allows 1 MHz increment from 100 MHz to 150 MHz
- Adjustable CPU, DDRII frequencies
Form Factor Š ATX form factor; 30.5cm x 24.4cm