Integra DTR-7.1 - Manual (Page 66)

66
Using a Macro function
Erasing a macro from the MODE MACRO
button
1. Press and hold down the desired MODE
button, press the MODE MACRO button, and
then release both buttons.
When you press the MODE button, the SEND/LEARN
indicator lights and that mode appears in the display. When
you press the MODE MACRO button, the indicator turns off.
When you release the buttons, the indicator flashes once and
“M 01” appears in the display.
2. Press the MODE MACRO button again.
The SEND/LEARN indicator flashes twice slowly and
“CLEAR” appears in the display. The macro programmed to
the MODE button pressed in Step 1 above is erased.
Note:
• If no button is pressed for more than 30 seconds during the
programming, the SEND/LEARN indicator flashes three
times quickly, “ERROR” appears in the display, and the
remote controller exits the programming mode. Resume from
Step 1.
• Be aware that if you press a button other than MODE MACRO
button in Step 2, then you will in effect be overwriting the
previous macro with a new macro.
Erasing a direct macro from the DIRECT
MACRO button
1. Press and hold down any one of the eight
MODE buttons, press the DIRECT MACRO
button, and then release both buttons.
When you press the MODE button, the SEND/LEARN
indicator lights and that mode appears in the display. When
you press the DIRECT MACRO button, the indicator turns
off. When you release the buttons, the indicator flashes once
and “M 01” appears in the display.
2. Press the DIRECT MACRO button again.
The SEND/LEARN indicator flashes twice slowly and
“CLEAR” appears in the display. The macro programmed to
the DIRECT MACRO button is erased.
Note:
• If no button is pressed for more than 30 seconds during the
programming, the SEND/LEARN indicator flashes three
times quickly, “ERROR” appears in the display, and the
remote controller exits the programming mode. Resume from
Step 1.
• Be aware that if you press a button other than DIRECT
MACRO button in Step 2, then you will in effect be
overwriting the previous direct macro with a new direct macro.
HOME THEATER CONTROLLER
RC-418M
OPEN/COLSE REC
AUDIO MUTING
DISC TRACK
DVD CD
PH TUN T2 T1
V1
STEREO
1 2 3
6 5 4
7
+ 10 0 ENT
8 9
SURROUND THX DSP
LEVEL + CH SEL Re-EQ
LEVEL – DIMMER LATE NIGHT
DIRECT DSP
V2 V3 V –
MODE MACRO
HOME THEATER CONTROLLER
RC-418M
OPEN/COLSE REC
AUDIO MUTING
DISC TRACK
DVD CD
PH TUN T2 T1
V1
STEREO
1 2 3
6 5 4
7
+ 10 0 ENT
8 9
SURROUND THX DSP
LEVEL + CH SEL Re-EQ
LEVEL – DIMMER LATE NIGHT
DIRECT DSP
V2 V3 V –
DIRECT MACRO
MODE buttons
MODE buttons