Integra DTR-7.1 - Manual (Page 46)

46
5. OSD Setup menu
This menu provides settings for you to customize the on-screen
display (OSD) for the DTR-7.1 by setting different colors or
positions for its display.
OSD Setup
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.OSD Setup
|ENTER| Quit:|OSD|
5.OSD Setup
1.OSD Config
2.OSD Setup
3.OSD Position
|ENTER| Quit:|OSD|
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.OSD Setup
|ENTER| Quit:|OSD|
5.OSD Setup
1.OSD Config
2.OSD Setup
3.OSD Position
|ENTER| Quit:|OSD|
5-1.OSD Config
a.OSD Output :S Video
Quit:|OSD|
5-1. OSD Config sub-menu
a. OSD output
This setting allows you to set the output of the ODS Menu. Select
the video terminal to which your monitor is connected: “S
VIDEO” or “VIDEO.”
S Video: Outputs the OSD Menu through the S VIDEO
MONITOR OUT terminals.
Video: Outputs the OSD Menu through the VIDEO MONITOR
OUT terminals.
Note:
If the OSD Menu is not displayed on the television monitor you are
using, confirm whether the television is connected to an S VIDEO
MONITOR OUT terminal or VIDEO MONITOR OUT terminal.