Removing/installing the caster assemblies, Removing, Installing – Invacare 220 User Manual
Page 39
SECTION 9—WHEELS AND CASTERS
39
Removing/Installing the Caster Assemblies
NOTE: For this procedure, refer to FIGURE 9.4.
Removing
1. Remove the dust cap (not shown).
2. Using a wrench, turn the hex nut on the caster assembly counter-clockwise to loosen it.
3. Remove the caster wheel.
4. Repeat STEPS 1-2 to remove the other caster.
Installing
1. Insert the new caster wheel into the caster housing.
2. Turn the hex nut clockwise to securely tighten the caster wheel in place.
3. Reinstall the dust cap (not shown).
4. Repeat STEPS 1-3 to remove the other caster.
FIGURE 9.4 Removing/Installing the Caster Assemblies
Swingarm Assembly
Caster Housing
Hex Nut
Caster
Location of
Dust Cap
NOTE: Dust caps on caster assemblies not shown.
See also other documents in the category Invacare Communication:
- LC34 (8 pages)
- 2GT (176 pages)
- 1055947 (2 pages)
- 9000 Topaz (68 pages)
- 1145549 (4 pages)
- 6027 (8 pages)
- 01-349 (4 pages)
- Compass XE (12 pages)
- BUZZ HMV (52 pages)
- Excel Power Sling Seat (4 pages)
- Front Anti Tippers 1326 (2 pages)
- Wheelchair 3G Ranger X (6 pages)
- 6291E Adult (16 pages)
- 6845-5 (2 pages)
- XtraTM 1026793 (60 pages)
- Formula TRE (174 pages)
- 6300-5F (36 pages)
- 1048922 (2 pages)
- Wheelchair XP6520 (64 pages)
- 1141466 (8 pages)
- F-6 (52 pages)
- 95-1 (20 pages)
- Auriga10 (63 pages)
- XLT (76 pages)
- 1335 (2 pages)
- 1069956 (2 pages)
- CareGuard (2 pages)
- 1085144 (8 pages)
- 1610 (8 pages)
- Lightweight (64 pages)
- At'm (44 pages)
- 65100R-JR (40 pages)
- Crossfire T6A (6 pages)
- Comfort-Mate Extra / Comfort-Mate Extra Base (4 pages)
- IVC Heavy Duty Shower Chair 9781 (16 pages)
- Lynx L-3X (60 pages)
- GET-U-UP LIFT (28 pages)
- V18PLR (1 page)
- Excel (152 pages)
- 400 (50 pages)
- 9000 (24 pages)
- 4M900 (255 pages)
- A1541 (2 pages)
- ITFG (24 pages)
- 1300 (1 page)