Invacare 220 - Manual (Page 35)

SECTION 8—TILLER ADJUSTMENT
Part No. 1125053 35 220
SECTION 8—TILLER ADJUSTMENT
Adjusting the Tiller Angle
ƽ WARNING
Before performing any maintenance, adjustment or service, turn power OFF and
remove key from ignition.
Ensure that tiller is properly adjusted before driving the scooter.
After making ANY tiller angle adjustments and BEFORE use, the tiller MUST be
securely locked into position. Otherwise, a fall from the scooter could occur causing
bodily injury and/or damage to the scooter. Gently, push/pull against tiller to ensure
that the tiller is securely engaged into the adjustment plate.
NOTE: For this procedure, refer to FIGURE 8.1.
NOTE: The powered scooters feature an adjustable tiller. The tiller locks into a position that is most
comfortable for you. The tiller can also be folded down for transportation and storage.
1. Rotate the tiller adjustment knob counter-clockwise (towards the user) to loosen the
tiller.
2. Push/pull the tiller to the desired angle.
3. Rotate the tiller adjustment knob clockwise (away from the user) to secure the tiller in
the new position.
4. Gently, push/pull against tiller to ensure that the tiller is securely engaged into the
locking mechanism.
FIGURE 8.1 Adjusting the Tiller Angle
Tiller Adjustment Knob
Tiller
Assembly