beautypg.com

Removing/installing the deluxe seat, Removing, Installing – Invacare 220 User Manual

Page 31

background image

SECTION 7—SEAT AND ARMS

Part No. 1125053

31

220

Removing/Installing the Deluxe Seat

ƽ WARNING

Before use, ensure that the seat is in the locked position. The seat lever MUST be

pulled up to the 90° position to allow the seat to drop into the locked position. Oth-

erwise, a fall from the scooter could occur causing bodily injury and/or damage to

the scooter.

NOTE: For this procedure, refer to FIGURE 7.3.

Removing

1. Fold down seat back.
2. Pull up the seat lock lever to 90°.
3. Lift the seat assembly up and away from the seat post.

Installing

1. Lower the seat assembly onto the seat post.
2. Pull up the seat lock lever to 90° to allow the seat to drop into the locked position.
3. Lift up on seat assembly to ensure the seat is secure.

FIGURE 7.3 - Removing/Installing the Deluxe Seat

Seat Lock Lever in

Unlocked Position

Seat Lock Lever

in Locked

Seat

Assembly

Seat Post

NOTE: Tiller not shown for clarity.