Invacare Formula - Manual (Page 191)

Vent Tray Mounting Hardware
Conventional & Contoura Recline Only
NOTE: When adding a Vent Tray Assembly in the field for the first time, refer to page titled "Accessories,
Vent Tray Kits"
Item
Number Part Number Description Note
Quantity Per
Package Assembly
1125819 Kit, Vent Tray Mounting Hardware For Conventional
& Contoura Recline Only 1 1 1 A,A1
Screw, Shoulder Hex Socket Head (5/16" x 3",
1/4-20) 1 1 2
Washer (11/32 x 13/16 x 1/8") 1 1 3
Washer, Nylon (25/64 x 7/8 x 1/32") 1 2 4
Locknut (1/4-20) 1 1 5
Screw, Hex Head (3/8-16 x 1-1/4") 1 2 6
Spacer (3/8 x 3/4 x 3/8") 1 2 7
Locknut, Low Profile (3/8-16) 1 4 8
Screw, Shoulder Hex Socket Head (1/4 x 1",
#10-24) 1 6 9
NLA - Spacer 1 4 10
Screw, Shoulder Hex Socket Head (1/4 x 1-3/4",
#10-24) 1 2 11
Screw, Shoulder Hex Socket Head (1/2 x 2-3/4",
3/8-16) 1 2 12
Spacer, Nylon (1/4 x 7/16 x 1/8") 1 4 13
Washer, Steel (7/8 x 3/8 x 1/16") 1 8 14
Locknut (#10-24) 1 8 15
Spacer, Nylon (1/4 x 2 x 3/4") 1 2 16
NLA - Bracket, Lower Vent Mounting, Black 1 2 17
NLA - Vent Pivot Tube Assembly, Lower 1 2 18
Vent Pivot Tube Assembly, Bent 1 2 19
A - Includes items 2-19. Vent Tray Mounting Hardware was revised after 4/2/06 and replaces all hardware used before 4/3/06
also. Sold as a hardware kit only.
A1 - To know when the hardware kit has been replaced, one of the hardware components (item 19) was revised from a
Straight Pivot Tube to a Bent Pivot Tube assembly.
NOTE:
190
To order call toll free 1-800-333-6900, or www.invacare.com
Form No. 04-041