Insignia NS-LDVD26Q-10A - Manual (Page 25)

19
www.insigniaproducts.com
2 Press or to highlight a setting, then press
or to adjust the setting or open a setting
menu. If a another menu opens, press , , ,
or to adjust the setting. You can select:
• Aspect Ratio—In TV mode, you can select
Normal, Zoom, Wide, Cinema, Panorama, or
Auto Zoom (TV mode only). In VGA mode, you
can select Normal or Wide.
• Color Temperature—You can select Cool,
Normal, or Warm.
• Noise Reduction—You can select Off, Weak,
Middle, Strong, or Auto. Auto is only
available in analog TV mode, AV1 mode, AV2
mode, and S-Video mode.
• Overscan—You can select On or Off. You can
use the Overscan function to adjust the
image when the extra image is not normally
seen.
• Adaptive Contrast—You can select On or Off.
• DRC—You can select On or Off.
3 Press TV MENU one or more times to return to
the previous menu.
4 Press EXIT to close the menu.
Adjusting VGA settings
To adjust VGA settings:
1 Press TV MENU, then press or to highlight
the Settings icon. The Settings menu appears.
2 Press to access the Settings menu.
3 Press or to highlight Computer Settings,
then press or to open the Computer Settings
menu.
4 Press or to highlight a setting, then press
or to adjust the setting or open a settings
menu. If another menu opens, press or
to adjust the setting. You can select:
• Auto Adjust—Automatically adjusts the PC to
the best settings. When this option is
highlighted, press
or OK/ENTER to
activate the option and automatically adjust
the PC settings.
• H.Position—Moves the screen image right or
left.
• V.Position—Moves the screen image up or
down.
• Clock—Adjusts the sample frequency.
• Phase—Adjusts the focus to stabilize the
image.
5 Press TV MENU one or more times to return to
the previous menu.
6 Press EXIT to close the menu.
Changing the PC’s video resolution
To change the PC’s video resolution:
1 Click Start, Control Panel, then double-click
Display. The Display Properties dialog box
opens.
2 Click the Settings tab.
3 Change the screen resolution setting to a
supported resolution. The ideal resolution for
your TV/DVD combo is 1360 × 768.
4 Click OK, then click Yes to save your changes.
PC signal input chart
The following table shows the suggested screen
resolutions.
If "Unsupported Mode" appears on the screen,
adjust the PC display setting to correspond to one
of the settings in the preceding table.
Note
If Auto Zoom is set to Off on the Channel menu,
Auto Zoom will not appear in the Aspect Ratio list.
Move
Set various TV options.
Select Previous Exit OK
ENTER MENU EXIT
Picture
Settings
Parental Controls
Time
Menu Settings
Input Labels
Computer Settings
Closed Caption
Reset to Factory
Audio Channel Settings
Move
Adjust to the PC signal timing automatically when ON.
Select Previous Exit OK
ENTER MENU EXIT
Picture
Settings • Computer Settings
Auto Adjust
H.Position
V.Position
Clock
Phase
Audio Channel Settings
50
27
50
75
Format Resolution Frequency (Hz)
VGA
640 Ч 480
720 Ч 400 60
70
SVGA
800 Ч 600
800 Ч 600 60
72
XGA 1024 × 768 60
WXGA
1280 Ч 768
1360 Ч 768 60
60