Insignia NS-LDVD26Q-10A - Manual (Page 23)

17
www.insigniaproducts.com
5 Press OK/ENTER. Your TV/DVD combo scans for
channels, if necessary.
When the scan is complete, your
TV/DVD combo displays the first channel in the
memorized channel list. You can stop the scan
by pressing EXIT.
Understanding the basics
Turning your TV/DVD combo on and off
To turn your TV/DVD combo on and off:
1 Press POWER. The power indicator turns
blue and your TV/DVD combo turns on.
2 To turn off your TV/DVD combo, press
POWER again. Your TV/DVD combo turns off
and the power indicator turns red.
Selecting the video input mode
Your TV supports multiple video input modes.
To select the video input mode:
1 Press INPUT to display the input source menu,
then press INPUT repeatedly or press or to
select a video input mode. You can select:
• TV
• AV1
• AV2
• S-Video
• Component 1
• Component 2
• DVD
• HDMI1
• HDMI2
• HDMI3
• VGA
2 Press OK/ENTER.
Selecting a channel
To select a channel:
• To go to the next or previous channel in the
channel list, press CH and CH . Pressing one
of these buttons skips any channels that are
not in the channel list. The channel list was
created when you ran the Setup Wizard or
when you scanned for channels.
• To select an analog or main digital channel,
press the number buttons for the channel.
• To select a digital sub-channel, press the
number buttons for the main digital channel,
press , then press the number for the digital
sub-channel.
• To tune to the last viewed channel, press
RECALL.
Adjusting the volume
To adjust the volume:
• Press VOL+ or VOL– to increase or decrease the
volume.
• Press MUTE to turn off the sound. Press again
to restore the sound.
Viewing channel information
To view channel information:
1 In digital TV mode, select a channel you want to
watch.
2 Press INFO to display information about the
program content, if available.
3 Press INFO again to close the display.
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
Note
When your TV/DVD combo is turned off, power still
flows into it. To disconnect power, unplug the power
cord.
Move Select Previous Exit OK
ENTER MENU EXIT
Choose your TV source
Antenna
Scan for channels
Digital Channels 0
Cable
Cable/Satellite box
Analog Channels 0
Select Antenna if using an antenna for standard or HD TV.
CH 14.1
BART-TV CC Off
704×480 Audio 1/1(L | R)
05/20/2005 08:00 AM Sound On
TV-14 / NL TV-14 / IQ-NL
No Event Information