Intel ESM-2850 2047285001R - Manual (Page 47)

User’s Manual
ESM-2850 User’s Manual 47
3.5.2.2 Hard Disk Boot Priority
This item allows you to select the Hard Disk device boot up priority.
Item Description
Pri./Sec.
Master/Slave
Boot up from IDE Primary/Secondary Master/Slave Hard Disk
USBHDD
0/1/2
Boot up from 1st/2nd/3rd USB Hard Disk
Bootable
Add-in Cards
Boot up from other Add-In Card Hard Disk Device.
3.5.2.3 Virus Warning
Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection.
If this function is enabled and someone attempt to write data into this area, BIOS will show
a warning message on screen and alarm beep.
Item Description
Enabled
Activates automatically when the system boots up causing a warning message to
appear when anything attempts to access the boot sector or hard disk partition table.
Disabled
No warning message will appear when anything attempts to access the boot sector or
hard disk partition table.
3.5.2.4 CPU L1 & L2 & L3 Cache
The item allows you to speed up memory access. However, it depends on CPU design.
Item Description
Enabled Enable cache
Disabled Disable cache
3.5.2.5 Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power up the computer. If it
is set to Enable, BIOS will shorten or skip some check items during POST.
Item Description
Enabled Enable quick POST
Disabled Normal POST
3.5.2.6 First/Second/Third/Other Boot Device
The BIOS attempts to load the operating system from the devices in the sequence selected
in these items.
Item Description
Floppy Floppy Device
LS120 LS120 Device
Hard Disk Hard Disk Device
CDROM CDROM Device
ZIP100 ZIP-100 Device
USB-FDD USB Floppy Device
USB-ZIP USB ZIP Device
USB-CDROM USB CDROM Device
LAN Network Device
Disabled Disabled any boot device