Port vlan on optics (or uplink) port, Port vlan on data port, Port vlan filter – IMC Networks iMcV-Giga-FiberLinX-II User Manual
Page 28
24
No VLANs are defined allowing only untagged packets to pass through the unit.
Port VLAN on OPTICS (or UPLINK) port
This parameter allows you to restrict traffic to a single VLAN ID tag for the OPTICS (or
UPLINK) port by entering Y in the Tags column of the Optics row. In the VLAN IDs -
Saved column of the Data row, enter the VLAN ID tag to be used (in this example,
13). This VLAN ID will be added to all untagged traffic entering the DATA port and
removed from all traffic leaving the DATA port.
Port VLAN on DATA Port
Restrict traffic to a single VLAN ID tag for the DATA port by entering Y in the Tags
column of the Data row. In the VLAN IDs–Saved column of the Optics row, enter
the VLAN ID tag to use (in this example, 13). The VLAN ID will be added to all
untagged traffic entering the OPTICS (or UPLINK) port and removed from all traffic
leaving the OPTICS (or UPLINK) port.
Saved VLAN Values
Tags
VLAN IDs Priorities
Current Saved Current Saved
Ports Data VLANs are used only
Optics [0 ] [
13
] [0 ] [
0
] [
N
] if Tags are enabled on both
e Optics and Data Ports.
Data [0 ] [
0
] [0 ] [
0
] [
Y
] th
Management VLAN EXT Mgmt Tag
NMP [0 ] [
0
] [0 ] [
0
] [
N
]
S
Data VLANs
]
VLAN 1 [0 ] [
0
] VLAN 12 [0 ] [
0
] VLAN 23 [0 ] [
0
VLAN 2 [0 ] [
0
] VLAN 13 [0 ] [
0
] VLAN 24 [0 ] [
0
]
Saved VLAN Values
Tags
VLAN IDs Priorities
Current Saved Current Saved
Ports Data VLANs are used only
Optics [0 ] [
0
] [0 ] [
0
] [
Y
] if Tags are enabled on both
e Optics and Data Ports.
Data [0 ] [
13
] [0 ] [
0
] [
N
] th
Management VLAN EXT Mgmt Tag
NMP [0 ] [
0
] [0 ] [
0
] [
N
]
S
Data VLANs
VLAN 1 [0 ] [
0
] VLAN 12 [0 ] [
0
] VLAN 23 [0 ] [
0
]
VLAN 2 [0 ] [
0
] VLAN 13 [0 ] [
0
] VLAN 24 [0 ] [
0
]
VLAN 3 [0 ] [
0
] VLAN 14 [0 ] [
0
] VLAN 25 [0 ] [
0
]
VLAN 4 [0 ] [
0
] VLAN 15 [0 ] [
0
] VLAN 26 [0 ] [
0
]
VLAN 5 [0 ] [
0
] VLAN 16 [0 ] [
0
] VLAN 27 [0 ] [
0
]
VLAN 6 [0 ] [
0
] VLAN 17 [0 ] [
0
] VLAN 28 [0 ] [
0
]
VLAN 7 [0 ] [
0
] VLAN 18 [0 ] [
0
] VLAN 29 [0 ] [
0
]
VLAN 8 [0 ] [
0
] VLAN 19 [0 ] [
0
] VLAN 30 [0 ] [
0
]
VLAN 9 [0 ] [
0
] VLAN 20 [0 ] [
0
] VLAN 31 [0 ] [
0
]
VLAN 32 [0 ] [
0
]
VLAN 10 [0 ] [
0
] VLAN 21 [0 ] [
0
]
VLAN 11 [0 ] [
0
] VLAN 22 [0 ] [
0
]
7.
Valid VLAN IDs are between 1 and 4094. Valid priorities are between 0 and
Type S or F3 to save the changes. Type Q or F4 to quit and cancel changes.
Port VLAN Filter
Use the Port VLAN filter to pass traffic with up to 32 separate VLAN IDs between the
OPTICS (or UPLINK) port and the DATA port. To enable the Data VLANS fields, you