MSI G52-M6570XA-G22 - Manual (Page 57)

3-2
MS-6570 ATX Mainboard
Entering Setup
Power on the computer and the system will start POST (Power On Self Test)
process. When the message below appears on the screen, press key to
enter Setup.
Press DEL to enter SETUP
If the message disappears before you respond and you still wish to enter Setup,
restart the system by turning it OFF and On or pressing the RESET button.
You may also restart the system by simultaneously pressing , ,
and keys.
Control Keys
<
↑
> Move to the previous item
<
↓
> Move to the next item
<
←
> Move to the item in the left hand
<
→
> Move to the item in the right hand
Select the item
Jumps to the Exit menu or returns to the main menu from a submenu
<+/PU> Increase the numeric value or make changes
<-/PD> Decrease the numeric value or make changes
General help, only for Status Page Setup Menu and Option Page
Setup Menu
Restore the previous CMOS value from CMOS, only for Option Page
Setup Menu
Load the default CMOS value from Fail-Safe default table, only for
Option Page Setup Menu
Load Optimized defaults
Save all the CMOS changes and exit