Philips Magnavox MDV630R - Manual (Page 84)

82
PROBLEM SOLUTION
I cannot playback (Super)
Video CDs b It is possible that this (Super) Video CD contains a menu and the 'PBC' is switched off. You
can see this in status field 'PBCOFF'. To activate this function, proceed as follows:
1 Press SYSTEM-MENU while the (Super) Video-CD is inserted.
2 Select ' A ' using D or C .
3 Select line 'Features' using B or A and confirm with C .
4 Select 'On' in line 'PBC' using B or A .
5 Confirm with OK and end with SYSTEM-MENU .
Poor playback on DVD
recorder (distorted
picture/distorted sound) b Your TV is not properly adjusted.
b The disc is dirty. Clean the disc.
b Sometimes the picture may be temporarily distorted. This is not a defect of your DVD
recorder.
No recording possible. b The TV channel you want to record is not stored or you selected the wrong program
number: Check TV channels stored.
b Disc is write-protected (cannot be recorded on). Remove write-protection or change disc.
For more information, please see 'Preventing accidental erasing of discs' on the 'Manual
Recording' page.
b A finalized DVD+R disc has been inserted. Change disc.
Programmed recording
does not work. b You have programmed the wrong time or date. Check time/date.
b You have not set the TIMER properly. Check the programmed recordings.
b A locked disc inserted. Remove disc lock.
b A finalized DVD+R has been inserted. Change disc.
The wrong TV channel was
entered after you
programmed a recording
using the VCR Plus+
system.
1 Enter the PlusCode programming number of the desired TV channel.
2 Confirm with OK .
3 Check the channel number in the 'Ch.' input field
4 If this does not correspond to the desired TV channel, select the channel field and
change the channel number.
5 Confirm with OK .
There is picture or sound
interference with the TV
reception. b During playback via the internal TV tuner ( MONITOR button), switch to recording mode ' HQ'
by pressing REC MODE . This will give you the best possible picture quality.
Before making the recording, select the recording mode as described in 'Selecting the
recording mode (quality)' .
b Change channels at the TV. Press CH- or CH+ to go to channel 4, 3, or Audio/Video In, EXT
IN, ANT IN, etc.
b Have your antenna or Cable TV signal checked.
Distorted sound coming
from a connected hi fi
amplifier b The DVD recorder is connected to the 'Phono-input' of your amplifier. This jack is provided
only for record players without a preamplifier. Connect to a different audio input.
The picture is distorted or
black and white during
playback. b The TV system of the disc does not match that of your TV (PAL/NTSC).
b The recording can be made in color only when the TV channels or the connected additional
device sends a color signal. Black-and-white signals without color information (color
subcarriers) cannot be recorded in color.
No sound signal at the
digital output b Check whether the sound settings match the selected inputs and connected additional devices.
Before you call technical support