Philips Magnavox MDV630R User Manual

Page 25

Insert one end of the supplied power cable into the power outlet

4MAINS at the back of the DVD recorder and the other end

into the wall socket. '

IS TV ON?' will appear on the display.

Then, read 'Initial installation' in 'Installing your DVD recorder.'

Connecting with a S Video (Y/C) cable

Have the following cables ready:
an antenna cable (1, supplied), a power cable (2, supplied), a S-video (SVHS) cable (3), an audio
cable (4, supplied red/white jack).

Remove the antenna cable plug from your TV. Insert it into the

ANTENNA jack at the back of the DVD recorder.

Insert one end of the supplied antenna cable into the TV jack at
the back of the DVD recorder and the other end into the
antenna input jack at the back of the TV.

Use a S-Video (SVHS) cable and plug one end into the OUT
S-VIDEO (Y/C) jack at the back of the DVD Recorder and the
other end into the S-Video (SVHS) In jack of the TV (usually
called S-Video in or SVHS in. Please see your TV's owner's
manual).

Use the supplied audio (cinch) cable and plug one end into the
red/white cinch jack OUT L AUDIO R at the back of the DVD
Recorder (next to OUT S-VIDEO (Y/C) ) and the other into
the corresponding red/white audio input of the TV (usually called
Audio in', 'AV in'-please see your TV's manual).

Switch on the TV. Then switch the set to the SVHS input jack or
select the corresponding channel number. You will find the
channel number in the operating instructions of your TV.

ENGLISH

Connecting the DVD recorder