Philips Magnavox MDV630R - Manual (Page 38)

36
VCR Plus+ ® Guide channel numbers
If you intend to use the VCR+ ® programming system, you must first assign channel numbers to
Guide channel numbers.
1 Press SYSTEM-MENU on the remote control. The menu bar
will appear in the display.
2 Select ' A ' using D or C .
3 Select line 'Installation' using B or A and confirm with C .
4 Select the line 'VCR Plus+ Ch.' using B or A and confirm
with C .
Installation
VCR Plus+ Ch.
VCR Plus+ Ch. Channel
...
001 ---
002 ---
003 ---
004---
005
---
...
To exit press
SYSTEM MENU
5 Use B or A to select the Guide channel number you want to
assign to a channel number.
6 Use D or C , or use the number buttons 0..9 to select the
channel corresponding to this Guide channel number. An
overview of guide numbers/TV channels can be found in your
daily newspaper or in your TV listings.
7 Confirm the allocation with OK .
8 To end, press SYSTEM-MENU .
Installing your DVD recorder