Connecting a camcorder to the front jacks, Connecting audio devices to analog audio jacks, Connecting additional devices – Philips Magnavox MDV630R User Manual
Page 30
28
Connecting a camcorder to the front jacks
The front video and audio jacks can be used to easily connect a camcorder to the DVD
recorder. These jacks are behind the door in the lower left corner of the front panel.
Very good Picture Quality
If you are using a Hi8 or S-VHS camcorder, connect the S-VIDEO IN jack of the DVD
recorder to the corresponding S-video out jack on the camcorder.
You must also connect the left AUDIO right In jacks of the DVD recorder to the audio out
jacks on the camcorder.
Good Picture Quality
If your camcorder only uses a video output (Composite Video or CVBS), connect the
VIDEO input of the DVD recorder to the corresponding Video Out jack on the camcorder.
You must also connect the left AUDIO right In jacks of the DVD recorder to the audio out
jacks on the camcorder.
Connecting audio devices to analog audio
jacks
There are Left/Right Audio Out jacks OUT L AUDIO R and two Left/Right Audio In jacks IN L
AUDIO R on the back of the DVD recorder.
These can be used to connect the following devices:
•) an receiver with Dolby Surround Pro Logic
•) a receiver with two channel analog stereo
Can I use the 'Phono input' ofmy amplifier?
This amplifier jack (input) should only be used for record players without
amplifiers. Do not use this input for connecting the DVD recorder.
This could damage the DVD recorder or the amplifier.
?
Connecting additional devices