Setting up a bluetooth connection – Siemens U15 User Manual
Page 130
129
Getting More Out of Your Phone
If the phone does not find an infrared-capable device, it changes
the right soft key (
+
) from
STOP
to
START
.
To break the infrared data connection, press
STOP
(
+
).
You can also move the device away from the phone, turn off the
device, or turn off the phone. If your phone moves away from a
connected device while it is still on, it will try to re-connect for 30
seconds after the connection breaks.
Setting Up a Bluetooth Connection
Before connecting your phone to another Bluetooth device, set
up the other device as described in its user guide.
For a PC, set up the Bluetooth accessory card, card drivers,
and application software. If you want to use Dial-up
Networking Services, configure them for the Bluetooth
modem as described in the software and modem user
guides.
Notes:
•
Your phone must be within 10 meters (33 feet) of the other
device. Nothing can block the line of sight between the two
devices.
Find the Feature
M
>
Settings
>
Connection
>
IrDA Link
Press
To
START
(
+
)
activate the infrared link
Press
To
START
(
+
)
try another connection