Chapter 14. ethernet management (base modem), 1 introduction, 2 ethernet management interface protocols – Mocomtech CDM-570 User Manual
Page 267
Chapter 14. ETHERNET
MANAGEMENT
(Base Modem)
14.1 Introduction
The base modem is equipped with an RJ-45, 10/100BaseT Ethernet management
interface used for monitor and control purposes.
Note that the optional IP module does NOT need to be installed.
This chapter of the manual will provide a high-level overview of the functionality
provided by this interface and references other chapters for further details.
14.2
Ethernet Management Interface Protocols
The modem 10/100BaseT Ethernet Management Interface supports three (3) different
management protocols:
• Web Server interface for complete product management
• SNMP with public and private MIB
• Telnet interface for remote product M&C
In general, the operation of each of these interfaces is essentially identical to the
management interfaces that are available when the optional IP module is installed.
14–1