Mocomtech CDM-570 User Manual
Page 162
CDM-570/570L Satellite Modem with Optional IP Module
Revision 4
Front Panel Operation
MN/CDM570L.IOM
6–38
If Upper is selected, the following sub-menu is displayed:
Edit BUC Current Alarm Upper limit. This is accomplished by selecting
the digit to be edited, using the
◄ ►
arrow keys. The value of the digit is
then changed using the
▲ ▼
arrow keys. The user should then press
ENTER. The range of current is 500 to 4000 mA.
If Lower is selected, the following sub-menu is displayed:
Edit BUC Current Alarm Lower limit. This is accomplished by selecting
the digit to be edited, using
◄ ►
arrow keys. The value of the digit is
then changed using
▲ ▼
arrow keys. The user should then press
ENTER. The range of current is 0 to 3000 mA.
(CONFIG, ODU, BUC) LO
If LO is selected, the following sub-menu is displayed:
Edit the value of the BUC LO frequency. This is accomplished by selecting the
digit to be edited, using the
◄ ►
arrow keys. The value of the digit is then
changed using the
▲ ▼
arrow keys. The user should then press ENTER. The
valid range is from 3000 to 65000 MHz.
Note this value is used to display the RF frequency of the modem/BUC
combination. If a value of 00000 is entered here (the default), then no RF
frequency will be displayed on the CONFIG, Tx, Tx Freq menu.
BUC Current Alarm Upper
Limit:1200mA (
◄ ►,▲ ▼,ENT)
BUC Current Alarm Lower
Limit:1200mA (
◄ ►,▲ ▼,ENT)
BUC LO Frequency:
12000 MHz (
◄ ►,▲ ▼,ENTER)