Chapter 5 cloning mode – Motorola DTR510 User Manual
Page 53
Chapter 5 Cloning Mode
Cloning mode is used to either add contacts wirelessly to other radios (Private or Groups, not
supported on DTR410) or duplicate all radio settings to new radios (using the optional cloning cable).
Cloning also allows all radios to maintain a contact list so that User Name is shown rather than User
ID when receiving voice and data calls.
DTR410 radios do not support the PrivateCall feature, but when cloned from a DTR510 / DTR610
will retain User Name information for easier use.
Entering Cloning Mode
1. Press
to turn the source radio on.
2. Enter the cloning mode by performing the following steps in sequence:
a. Hold down
and press the PTT button three times.
b. Press the Left
.
c. Press .
d. Press the Right
e. Hold down
and press the PTT button three times. The Clone Menu appears.
Cloning Using the Cloning Cable
1. From the Clone menu, scroll to select Duplicate Radio and press
under Select. The fol-
lowing screen is displayed indicating the target radio must now be connected to the source
radio to be cloned using the cloning cable.
Duplicate Rad...
Select
Clone Menu
Send Contact
Reset
Connect Clone
Clone
Back
Cable and
Press Clone