Motorola DTR510 User Manual
Page 41
6881097C81-O
April 27, 2005
Advanced Radio Operations: Accessing the Advanced Menu
3-3
Remote Disabling (initiated from DTR610 Models Only)
NOTE: Manager Mode must be enabled in order for a user to use this feature. Refer to page 4-8.
Remote Disabling allows a user to remotely enable or disable another DTR Series radio (except
DTR410) on their channel. The selected radio must be turned on and within range in order to be
enabled or disabled.
1. From the Advance menu, scroll to highlight Remote Disable and press
under Select.
The Remote Disable screen appears.
2. Scroll to highlight a radio name from the list. Press
under either Enable or Disable.
The screen changes to confirm the selection.
NOTE: To cancel out of Remote Disable, press
and press
under Select.
3. To enable or disable the selected radio, press
under either Yes or No.
Once the radio is disabled, the display shows “Radio Disabled” and the radio cannot transmit,
receive, or access it’s contacts.
Call Forward
Remote Disable
Remote Monitor
Select
Back
Scan:On
Joe Smith
Jones
Kevin
Disable
Remote Disable
Enable
Joe Smith
Radio Disabled