Motorola DTR510 - Manual (Page 50)

April 27, 2005 6881097C81-O
4-8 Radio Programming: Settings
7. Scroll to select On and press under Select. The display returns to the Advanced menu.
Settings
The settings for Display, VibraCall, Clock/Alarm, Volume, Scroll List, and Call Forward can also be
utilized through Programming Mode. Refer to Chapters 2 and 3.
Radio History
1. From the Program Menu, scroll to select Settings and press under Select.
2. Scroll to select Advanced and press under Select.
3. Scroll to select Radio History and press under Select.
TX is the total amount of transmit time. RX is the total amount of receive time. IDL is the total time the
radio has been turned on but not receiving or transmitting.
Scan Lists
Your DTR Series radio can scan up to 5 PublicGroups per channel. Scan can be turned on and off
from the advanced settings menu of User Mode, but what groups are scanned can only be changed
in Programming Mode.
To access Scan Lists:
(inset 1 & 2 from Radio History)
3. Scroll to Scan Lists and press (option key) under Select.
4. Select the channel you wish to change the Scan List on.
5. A "check mark" indicates which PublicGroups are scanned on that channel. Use the left
option key to remove or add groups to your scan list.
Manager Mode
Manager Mode provides access to Remote Disable, Remote Monitor, and Remote Time functions in
the User Menu. Enabling Manager Mode also allows the user to view and communicate with
PrivateGroups not on their home channel.
The Manager Mode can only be accessed through the Programming Mode. After entering
Programming Mode, proceed as follows to access the Manager Mode.
1. From the Program Menu, scroll to select Settings and press under Select.
2. Scroll to select Advanced and press under Select.
Radio History
Rx:
IDL:
Select Back
Tx: