Motorola DTR510 - Manual (Page 48)

April 27, 2005 6881097C81-O
4-6 Radio Programming: Adding Contacts (DTR510 / DTR610 only)
Selecting Group Only
Selecting Group Only on a radio prohibits the user from initiating PrivateCalls.
1. Scroll to select Group Only and press under Change. The Group Only screen
appears.
NOTE: A next to an selection indicates the present selection.
2. Scroll to select the desired entry and press under Select. The display returns to the
previous screen with the new Group Only entered.
Entering a Ringer Type (Private Calls Only - not supported on DTR410)
A unique alert tone can be identified for each radio in your contact list. There are 12 ringer tones that
can be selected. When a ringer tone is highlighted, the audio ringer tone sounds to help in making a
selection.
1. Scroll to select Ringer and press under Change. The Ringer screen appears.
NOTE: A next to a selection indicates the present selection.
2. Scroll to select the desired ring. Highlighting a tone lets you hear it.
3. Press under Select to select the new ring. The display returns to the previous screen
with the new Ringer entered.
4. Press under Save to store the new contact after all entries for the new contact have
been completed. A confirmation screen appears confirming the saved contact.
5. Press to exit Programming mode and return to the Main Menu. Press under
Reset.
Group Only
Select Back
No
None Yes
9
1
2
Select Back
Ringer
9
3