Meyer Sound 616 - Manual (Page 59)

GALILEO 616 USER GUIDE
59
USING PARAMETRIC EQ
When Parametric EQ is selected in the Input or Output Processing pages, all available EQ
points are presented on the page — five for inputs and 10 for outputs. Choose the particular
parametric EQ point to change using the Left and Right arrows; the selected one will blink.
Once a Parametric EQ point is selected, use the knobs to adjust the parameters, as follows;
the knobs behave the same as a single band of the Meyer Sound analog CP-10 parametric
equalizer:
■ Blue Knob: Moves the frequency center for each point; the value is shown in the “f=X.X”
field on the top left.
■ Green Knob: Adjusts the bandwidth of the parametric EQ point; turn clockwise to narrow
and counterclockwise to widen between 0.10 and 2.00; the value is shown in the
“bw=X.XX” field on the top center.
Parametric EQ with EQ Points
Parametric EQ with Equalization Changes