Meyer Sound 616 - Manual (Page 14)

CHAPTER 2: GALILEO 616 FEATURES AND FUNCTIONS
14
Front Panel Output Section
■ Signal / Clip LEDs: One for each output channel. For levels between around –85 dB
below clipping to approximately –5 dB below, the LEDs light green with intensity corre-
sponding to signal level. For levels from around –5 dB below clipping to the clipping level,
they light amber. The LED turns red if the signal level is at clipping, which occurs at levels
at or above +26 dBu (15.5 V rms; this range can also be set on the System Settings page
to +20 dBu / 7.75 V rms.)
NOTE: The default and recommended output setting is +26 dBu.
■ Output Select Buttons / LEDs: One for each output channel, to select the channel for
various actions; as many channels as desired can be selected at any time. The accompa-
nying blue LED lights when the channel is selected. Selecting a channel in the Compass
software also activates the button and the associated LED.
■ Output Mute Buttons: One for each output channel, allowing the channel to be muted or
unmuted. Selecting Mute for a channel in the Compass software also activates the button.
Galileo 616 Front Panel Output Section
Signal /
Clip LEDs
Output Mute
Buttons
Output Select
Buttons / LEDs