Declaration of conformity – Meyer Sound 616 User Manual

Page 2

DECLARATION OF CONFORMITY

(According to ISO/IEC Guide 22 and EN 45014)

Manufacturer’s Name:
Meyer Sound Laboratories Inc.

Manufacturer’s Address:
2832 San Pablo Avenue
Berkeley, CA 94702-2204, USA

Declares that the products
Product Name:

Galileo 616

Product Options:

All

Conforms to the following Product Specifications
Safety:

BS EN 61010-1:2001
IEC 61010-1 (2001-2002) 2nd ed
UL 61010A-1:2002

EMC:

IEC 61326 (2002-02)
BS EN 61326:1998

Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, includ-
ing interference that may cause undesired operation.

Supplementary Information
The product herewith complies with the requirements of the
Low Voltage Directive 73/23/EEC and the EMC Directive 89/
336/EEC.

European Contact: Your local Meyer Sound dealer or Meyer
Sound Germany, GmbH. Horresser Berg 4A, 56410 Mont-
abaur, Germany.

Environmental Specifications for Meyer Sound Electron-
ics Products

Galileo 616 User Guide

The contents of this manual are furnished for informational purposes only, are subject to change without notice, and should not
be construed as a commitment by Meyer Sound Laboratories Inc. Meyer Sound assumes no responsibility or liability for any
errors or inaccuracies that may appear in this manual. Except as permitted by applicable copyright law, no part of this publica-
tion may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical,
recording or otherwise, without prior written permission from Meyer Sound.

Galileo, Compass, Composite EQ, TruShaping, M Series, M1D, M2D, M’elodie, and MICA are trademarks of Meyer Sound.
Meyer Sound, SIM, M3D, and MILO and are registered trademarks of Meyer Sound Laboratories Inc. (Reg. U.S. Pat. & Tm. Off.).
All third-party trademarks mentioned herein are the property of their respective trademark holders.

Printed in the U.S.A.

Part Number: 05.141.002.08 A

Office of Quality Manager

Berkeley, California USA

November 11, 2006

Operating

Temperature

0° C to +45° C

Non-operating
Temperature

<–40° C or >+75° C

Humidity

to 95% at 35° C

Operating

Altitude

to 4600 m (15,000 ft)

Non-operating

Altitude

to 6300 m (25,000 ft)

Shock

30 g 11 msec half-sineon each of
6 sides

Vibration

10 Hz – 55 Hz (0.010 m peak-to-
peak excursion)

rth

A meri

Rheinlan