Meyer Sound 616 - Manual (Page 17)

GALILEO 616 USER GUIDE
17
GALILEO 616 REAR PANEL
The rear panel provides connections for six inputs and 16 outputs, plus connections to the
SIM 3 analyzer or additional Galileo units. An Ethernet connector allows connection to a
remote computer running the Compass software.
■ PowerCon AC Power Connector: This locking connector mates with the provided AC
power cable.
CAUTION: Make sure that you select the correct power plug for the AC power in
the area in which the Galileo 616 is used.
NOTE: The Galileo 616 incorporates Meyer Sound’s Intelligent AC power supply,
which automatically adjusts for any line voltage worldwide, and provides both
soft turn-on and transient protection.
■ Ethernet Connector: This RJ-45 connector is used with a shielded CAT-5e cable (recom-
mended) or better Ethernet data cable to connect the Galileo 616 to an Ethernet network,
allowing control of Galileo from a computer running the Compass control software.
■ Analog / AES Input Connectors: The upper three XLR-3F input connectors, highlighted in
blue and labeled A, C, and E, accept either a standard line-level analog signal or an AES
two-channel digital signal.
Galileo 616 Rear Panel
Analog / AES Input
Connectors
SIM 3 Bus
Connectors
PowerCon
AC Power
Connector
Output
Connectors
Analog Input
Connectors
Ethernet
Connector
!