Equalization settings menu – Meyer Sound 616 User Manual
Page 52
CHAPTER 4: USING THE GALILEO FRONT PANEL
52
Equalization Settings Menu
Use the Up and Down arrows, and press the Enter button to select from the following sub-
menu items:
■
Bypass All EQ: Temporarily removes all equalization from the input or output channel sig-
nal; select the item again to enable.
■
Bypass Parametric: Temporarily removes all parametric equalization from the input or
output channel signal while any other EQ remains; select the item again to enable.
■
Bypass TruShaping: Temporarily removes all TruShaping equalization from the input or
output channel signal while any other EQ remains; select the item again to enable.
■
Bypass Low/High Pass: Only in Output Processing, with the default as Bypassed, tempo-
rarily removes the low or high pass equalization from the output signal while any other EQ
remains; select the item again to enable.
■
VX-1 TruShaping Mode: Combines the upper two bands of the TruShaping EQ into a sin-
gle equalization band that is functionally the same as the analog VX-1 equalizer.
TIP:
When an output channel is on its High/Low Pass EQ page in either the graph
or numeric view, pushing the Enter button will toggle between Enabled and
Bypassed.
Equalization Settings Menu