Meyer Sound 616 - Manual (Page 26)

CHAPTER 3: CONNECTING THE GALILEO 616
26
Combination 2
■ Console = Front Panel Signal Generator (ex. Ad FP Ch 0 Generator). The SIM signal gener-
ator is used as the signal that feeds the Console bus.
■ Processor = Galileo Output Post Processing (ex. Ad 10, Ch 1 Sw 10 Proc 1). This uses the
output of the Galileo Output Processing as the signal that feeds the Processor bus.
NOTE: The transfer function shown will include any input and output processing
applied using Galileo and/or the mixing console.
Combination 3
■ Console = Front Panel Line Input 1 (ex. Ad FP 1 Line In 1) This uses the signal received at
Line Input 1 which can be in parallel to the console output feeding Galileo.
■ Processor = Galileo Output Post Processing (ex. Ad 10, Ch 1 Sw 10 Proc 1). This uses the
output of the Galileo Output Processing as the signal that feeds the Processor buss.
NOTE: The transfer function shown will include any input and output processing
applied using Galileo and/or the mixing console.