Multi-Tech Systems E1 - Manual (Page 374)

Index MultiVOIP User Guide
374
Answer Delay (Enable)............. 102
Answer Delay Timer................. 102
FXS Current Detect Timer........ 103
E1 Parameter definitions (FXS
Supervision)
Tone Detection.......................... 103
E1 Parameter fields
CAS Protocol ........................ 101
FXS Options – No Response
Timer ................................ 101
No Response Timer (FXS
Options) ............................ 101
Answer Tones ........................... 103
Available Tones (List) .............. 103
Caller ID Enable ....................... 105
Calling Number Prefix.............. 104
Calling Number Prefix (Caller ID)
.............................................. 105
Calling Number Suffix.............. 104
Calling Number Suffix (Caller ID)
.............................................. 105
Clocking.................................... 105
Country ..................................... 104
CRC Check ............................... 101
Detect Flash Hook .................... 105
Detection Time ......................... 105
Enable Caller ID ....................... 104
Frame Format............................ 101
Generation Time ....................... 105
Line Build-Out.......................... 105
Line Coding .............................. 106
Long-Haul Mode ...................... 101
Operator .................................... 104
PCM Law.................................. 106
Pulse Shape Level..................... 105
Tone Detection (Enable)........... 103
Yellow Alarm Format............... 106
E1 Parameters screen ...................... 99
E1 Statistics field definitions284, 285,
286
E1 Statistics fields
Bipolar Variation ...................... 286
Blue Alarm ............................... 284
Excessive Zeroes ...................... 286
Loss of Frame Alignment ......... 284
Loss of MultiFrame Alignment 285
Receive Slip .............................. 286
Receive Timeslot 16 Alarm
Indication Signal ................... 285
Receive Timeslot 16 Loss of
MultiFrame Alignment.......... 286
Receive Timeslot 16 Loss of Signal
.............................................. 285
Red Alarm................................. 284
Status Freeze Signalling Active 285
Transmit Data Overflow ........... 285
Transmit Data Underrun ........... 286
Transmit Line Open .................. 286
Transmit Line Short .................. 285
Transmit Slip............................. 286
Transmit Slip Negative ............. 286
Transmit Slip Positive............... 285
Yellow Alarm............................ 285
E1 telephony parameters ................. 56
Echo Cancellation field ................... 82
echo, removing................................ 82
Edit selected Inbound Phonebook
Entry icon
E1 .............................................. 216
T1 .............................................. 173
Edit selected Outbound Phonebook
Entry icon
E1 .............................................. 216
T1 .............................................. 173
email account for voip unit ........... 134
email address for voip ............. 57, 133
email log reports ........................... 133
email logs, illustration................... 139
EMC, Safety, R&TTE Directive
Compliance ............................... 348
Enable (Call Fwdg)
E1 .............................................. 229
T1 .............................................. 186
Enable (STUN) field ..................... 157
Enable Accounting (RADIUS) field
.................................................. 160
Enable Call Hold........................... 148
Enable Call Transfer ..................... 147
Enable Call Waiting ...................... 148
Enable Caller ID (E1) ................... 105
Enable Caller ID (T1) ..................... 97
Enable Caller Name Identification 149
Enable Console Messages field..... 142
Enable DHCP (Ethernet/IP
Parameters) field ......................... 69