Multi-Tech Systems E1 - Manual (Page 316)

Operation and Maintenance MultiVOIP User Guide
316
Setting a Password (Windows GUI)
After a user name has been designated and a password has been set,
that password is required to gain access to any functionality of the
MultiVOIP software. Only one user name and password can be
assigned to a voip unit. The user name will be required when
communicating with the MultiVOIP via the web browser GUI.
NOTE: Record your user name and password in a safe place. If
the password is lost, forgotten, or unretrievable, the user
must contact MultiTech Tech Support in order to resume
use of the MultiVOIP unit.
1. The MultiVoip configuration program must be off when invoking
the Set Password command. If it is on, the command will not work.